Academic Company Events NI Developer Zone Support Solutions Products & Services Contact NI MyNI

Performing Digital Data Transfers in Visual Basic with 6533 Family Devices

0 ratings | 0.00 out of 5
Print

Downloads

Filename: digdatatransfers.zip
Requirements: View

With National Instruments 6533 Family (DIO-32HS) devices and Measurement Studio, you can use your computer for high-speed PC-to-PC data transfers and transform your data acquisition system into a digital I/O tester, logic analyzer, or system controller for laboratory testing, production testing, and industrial process monitoring and control. These examples demonstrate how to configure programmatically a burst mode input operation using an external PCLK signal and a pattern output operation at a specified rate. Refer to Application Note 149 for information about Measurement Studio and performing digital data transfers with 6533 Family devices.

Requirements


Filename: digdatatransfers.zip

Software Requirements


Application Software: Measurement Studio Visual Basic Support
Language(s): Visual Basic
Additional Software: Visual Basic 5.0

Hardware Requirements


Hardware Group: Multifunction DAQ (MIO)
Driver: Traditional NI-DAQ (Legacy)

 
0 ratings | 0.00 out of 5
Print

Reader Comments | Submit a comment »

 

Legal
This example program (this "program") was developed by a National Instruments ("NI") Applications Engineer. Although technical support of this program may be made available by National Instruments, this program may not be completely tested and verified, and NI does not guarantee its quality in any way or that NI will continue to support this program with each new revision of related products and drivers. THIS EXAMPLE PROGRAM IS PROVIDED "AS IS" WITHOUT WARRANTY OF ANY KIND AND SUBJECT TO CERTAIN RESTRICTIONS AS MORE SPECIFICALLY SET FORTH IN NI.COM'S TERMS OF USE (http://ni.com/legal/termsofuse/unitedstates/us/).