Academic Company Events NI Developer Zone Support Solutions Products & Services Contact NI MyNI

Document Type: Example Program
NI Supported: Yes
Publish Date: Sep 6, 2006

Subscribe

Add to Del.icio.us

DIGG this!


Feedback


Yes No

Related Categories

Products

Development Topic

Related Links - Developer Zone

Related Links - Products and Services

Configuring the SCXI 1127/1128 as a 32x1 Matrix

1 ratings | 5.00 out of 5
Print

Downloads

Filename: scxi1127_32x1_matrix.vi
Requirements: View

The SCXI 1127/1128 can be configured as a 32x1 Matrix using the SCXI 1331 terminal block. This example demonstrates how to configure the switch in this mode.

Steps to Configure:

1) Configure switch using INDEP descriptor to set switch to independent mode.
2) Close the bank connect switches bc01, bc02, bc23.
3) Closing channel X will now connect Column X to your row, accessed by out+- terminals.

Requirements


Filename: scxi1127_32x1_matrix.vi

Software Requirements


Application Software: LabVIEW Base Development System 6.1
Language(s): LabVIEW

Hardware Requirements


Hardware Group: Switches
Hardware Model: SCXI-1128, SCXI-1127
Driver: NI-Switch 1.6

 
1 ratings | 5.00 out of 5
Print

Reader Comments | Submit a comment »

 

Legal
This example program (this "program") was developed by a National Instruments ("NI") Applications Engineer. Although technical support of this program may be made available by National Instruments, this program may not be completely tested and verified, and NI does not guarantee its quality in any way or that NI will continue to support this program with each new revision of related products and drivers. THIS EXAMPLE PROGRAM IS PROVIDED "AS IS" WITHOUT WARRANTY OF ANY KIND AND SUBJECT TO CERTAIN RESTRICTIONS AS MORE SPECIFICALLY SET FORTH IN NI.COM'S TERMS OF USE (http://ni.com/legal/termsofuse/unitedstates/us/).