Continuously Acquiring Data from Multiple Channels in VB .NET with the Measurement Studio 7.0 Waveform Graph
Print
This example demonstrates how to use the NI-DAQmx .NET class library to continuously acquire data using the DAQ device's internal clock. It also shows how to plot the data to a waveform graph. The example is set up to read from multiple channels as well (Dev1/ai0:7).
Filename: 2291.zip
Application Software: Measurement Studio Enterprise Edition System (Full Development System) 7.0
Language(s): Visual Basic .NET
Additional Software: Visual Basic
Hardware Group: Multifunction DAQ (MIO)
Hardware Model: DAQCard-6023E
Driver: NI-DAQmx 7.0
Requirements
Filename: 2291.zip
Software Requirements
Application Software: Measurement Studio Enterprise Edition System (Full Development System) 7.0
Language(s): Visual Basic .NET
Additional Software: Visual Basic
Hardware Requirements
Hardware Group: Multifunction DAQ (MIO)
Hardware Model: DAQCard-6023E
Driver: NI-DAQmx 7.0
Reader Comments | Submit a comment »
Legal
This example program (this "program") was developed by a National Instruments ("NI") Applications Engineer. Although technical support of this program may be made available by National Instruments, this program may not be completely tested and verified, and NI does not guarantee its quality in any way or that NI will continue to support this program with each new revision of related products and drivers. THIS EXAMPLE PROGRAM IS PROVIDED "AS IS" WITHOUT WARRANTY OF ANY KIND AND SUBJECT TO CERTAIN RESTRICTIONS AS MORE SPECIFICALLY SET FORTH IN NI.COM'S TERMS OF USE (http://ni.com/legal/termsofuse/unitedstates/us/).