Academic Company Events NI Developer Zone Support Solutions Products & Services Contact NI MyNI

Document Type: Example Program
NI Supported: Yes
Publish Date: Sep 6, 2006

PWM Output with LabVIEW FPGA

5 ratings | 3.20 out of 5
Print

Downloads

Filename: fpgapwmout.llb
Requirements: View

These examples demonstrate how to develop a PWM output using the LabVIEW FPGA Module and a Reconfigurable I/O device. This LLB includes two examples.

The first example implements an individual PWM output based on the pulse period and pulse width supplied by the host VI. The second example implements eight PWM outputs using a complete DIO port on the device. The LLB includes host VIs that you can run on LabVIEW for Windows or an RT target.

Requirements


Filename: fpgapwmout.llb

Software Requirements


Application Software: LabVIEW Full Development System 7.0
Toolkits and Add-Ons: LabVIEW FPGA Module 1.0
Language(s): LabVIEW

Hardware Requirements


Hardware Group: Reconfigurable I/O (RIO)
Hardware Model: PXI-7831R
Driver: NI-VISA 3.0, NI-RIO 1.0

 
5 ratings | 3.20 out of 5
Print

Reader Comments | Submit a comment »

 

Legal
This example program (this "program") was developed by a National Instruments ("NI") Applications Engineer. Although technical support of this program may be made available by National Instruments, this program may not be completely tested and verified, and NI does not guarantee its quality in any way or that NI will continue to support this program with each new revision of related products and drivers. THIS EXAMPLE PROGRAM IS PROVIDED "AS IS" WITHOUT WARRANTY OF ANY KIND AND SUBJECT TO CERTAIN RESTRICTIONS AS MORE SPECIFICALLY SET FORTH IN NI.COM'S TERMS OF USE (http://ni.com/legal/termsofuse/unitedstates/us/).