CompactRIO Extreme Validation and Verification Testing- Data Log Files

The attached files contain data log files from three extreme Validation & Verification tests on the CompactRIO Reconfigurable Control & Acquisition System. The data contained in these files was measured by the CompactRIO system and recorded on the built-in Flash storage. Most measurements were taken by the cRIO-9215 analog input module connected to MEMS accelerometers, gyroscopes, wind pressure sensors, and static air pressure sensors.


CompactRIO Drop Test
CompactRIO is dropped from the top of an eight-story building, with a resultant acceleration peak of 200.2 g. The CompactRIO system logs three accelerometers locally and simultaneously passes the data to a host computer on the ground via Ethernet. Use the included data viewer VI to display the data on a LabVIEW front panel graph. Zoom in to see the moment of impact.


CompactRIO Controls Rocket Launch
CompactRIO is placed inside a 9 ft rocket and controls the roll, pitch, yaw, and stage deployment.


CompactRIO Goes Skydiving
CompactRIO is used to record roll, pitch, yaw, XYZ acceleration, air pressure, GPS position, and altitude. The data is acquired at 60 S/s using a custom gyroscope module and two cRIO-9215 simultaneous sampling analog input modules.

A skydiving photograph with LabVIEW screenshot is also included. You can right-click on the image while viewing to set it as your Windows desktop wallpaper.

Related Links:

CompactRIO Web Site

Requirements

Filename: extremevvdata.zip

Software Requirements

Application Software: LabVIEW Full Development System 7.1
Language(s): LabVIEW

Hardware Requirements

Hardware Group: CompactRIO
Driver: NI-RIO 1.1

Reader Comments | Submit a comment »