Change the Board ID of a 73xx Device on a Local or a Real Time System
PrintDownloads
Filename: changeboardid.zip
Requirements: View
To change a boardID on a local machine, simply open the VI and run it.
To change the boardID on a remote machine, first open LabVIEW and target the remote PXI Real-Time system. Then, open the VI, download and run it on the remote system. This will change the boardID.
**NOTE: The changes will not take effect on a Real-Time system until the PXI controller is rebooted.
| Related Links: |
| KnowledgeBase 2X0911QS: How Can I Change the BoardID of a Motion Board in a Real-Time System? |
Requirements
Filename: changeboardid.zip
Software Requirements
Application Software: LabVIEW Base Development System 7.0
Language(s): LabVIEW
Hardware Requirements
Hardware Group: Motion Control
Hardware Model: PCI-7330, PCI-7350, PCI-7340
Driver: NI-Motion 6.1.2
Reader Comments | Submit a comment »
Legal
This example program (this "program") was developed by a National Instruments ("NI") Applications Engineer. Although technical support of this program may be made available by National Instruments, this program may not be completely tested and verified, and NI does not guarantee its quality in any way or that NI will continue to support this program with each new revision of related products and drivers. THIS EXAMPLE PROGRAM IS PROVIDED "AS IS" WITHOUT WARRANTY OF ANY KIND AND SUBJECT TO CERTAIN RESTRICTIONS AS MORE SPECIFICALLY SET FORTH IN NI.COM'S TERMS OF USE (http://ni.com/legal/termsofuse/unitedstates/us/).