NI-SYNC Route PXI_CLK10 to PFI Outputs
Print
Description:
The purpose of this VI is to route the PXI_CLK10 signal to the PFI lines of the 665x card. In the case of this example, the oscillator of the 6653 or 6652 is routed to the PXI_CLK10 line first, then the PXI_CLK10 line is routed to the specified PFI lines on the front panel (PFI0 and PFI1 by default).
Hardware Required:
PXI-6653 or PXI-6652. A PXI-6651 could be used if you remove the route from the oscialltor to PXI_CLK10 (the 6651 has no oscillator).
Connections Required:
None are required to run the example, but the chosen PFI lines on the front panel (PFI0 and PFI1 by default) will have the PXI_CLK10 signal. They should be connected to the desired destination(s) for the PXI_CLK10 signal.
Filename: 201177.vi
Application Software: LabVIEW Base Development System 7.0
Language(s): LabVIEW
Hardware Group: PXI/CompactPCI
Hardware Model: PXI-6653, PXI-6652
Driver: NI-Sync 1.2
The purpose of this VI is to route the PXI_CLK10 signal to the PFI lines of the 665x card. In the case of this example, the oscillator of the 6653 or 6652 is routed to the PXI_CLK10 line first, then the PXI_CLK10 line is routed to the specified PFI lines on the front panel (PFI0 and PFI1 by default).
Hardware Required:
PXI-6653 or PXI-6652. A PXI-6651 could be used if you remove the route from the oscialltor to PXI_CLK10 (the 6651 has no oscillator).
Connections Required:
None are required to run the example, but the chosen PFI lines on the front panel (PFI0 and PFI1 by default) will have the PXI_CLK10 signal. They should be connected to the desired destination(s) for the PXI_CLK10 signal.
| Related Links: |
| PXI Timing and Synchronization Product Page |
Requirements
Filename: 201177.vi
Software Requirements
Application Software: LabVIEW Base Development System 7.0
Language(s): LabVIEW
Hardware Requirements
Hardware Group: PXI/CompactPCI
Hardware Model: PXI-6653, PXI-6652
Driver: NI-Sync 1.2
Reader Comments | Submit a comment »
Legal
This example program (this "program") was developed by a National Instruments ("NI") Applications Engineer. Although technical support of this program may be made available by National Instruments, this program may not be completely tested and verified, and NI does not guarantee its quality in any way or that NI will continue to support this program with each new revision of related products and drivers. THIS EXAMPLE PROGRAM IS PROVIDED "AS IS" WITHOUT WARRANTY OF ANY KIND AND SUBJECT TO CERTAIN RESTRICTIONS AS MORE SPECIFICALLY SET FORTH IN NI.COM'S TERMS OF USE (http://ni.com/legal/termsofuse/unitedstates/us/).