Academic Company Events NI Developer Zone Support Solutions Products & Services Contact NI MyNI

Document Type: Example Program
NI Supported: Yes
Publish Date: Sep 6, 2006

NI-DAQmx: Counter Input Start Trigger

0 ratings | 0.00 out of 5
Print

Downloads

Filename: 201188.vi
Requirements: View

This example demonstrates how to use an arm start trigger to measure two edge separation on a Counter Input Channel. The First Edge, Second Edge, Minimum Value, and Maximum Value are all configurable.

The arm start trigger funcitonality can be used on M Series (62XX) or NI-TIO (660X) supported cards to synchronize counters and do hardware counter start triggering.

Requirements


Filename: 201188.vi

Software Requirements


Application Software: LabVIEW Professional Development System 7.1, LabVIEW Base Development System 7.1, LabVIEW Full Development System 7.1
Language(s): LabVIEW

Hardware Requirements


Hardware Group: Multifunction DAQ (MIO), Counter/Timers (TIO)
Hardware Model: PC-TIO-10, PXI-6289, PCI-6601, PCI-6608, PCI-6610, PCI-6624, PXI-6601, PXI-6602, PXI-6608, PXI-6610, PXI-6624, PXI-6220, PXI-6221, PXI-6230, PXI-6224, PXI-6229, PXI-6250, PXI-6251, PXI-6254, PXI-6259, PXI-6280, PXI-6281, PXI-6284, PCI-6602
Driver: NI-DAQmx 8.8

 
0 ratings | 0.00 out of 5
Print

Reader Comments | Submit a comment »

 

Legal
This example program (this "program") was developed by a National Instruments ("NI") Applications Engineer. Although technical support of this program may be made available by National Instruments, this program may not be completely tested and verified, and NI does not guarantee its quality in any way or that NI will continue to support this program with each new revision of related products and drivers. THIS EXAMPLE PROGRAM IS PROVIDED "AS IS" WITHOUT WARRANTY OF ANY KIND AND SUBJECT TO CERTAIN RESTRICTIONS AS MORE SPECIFICALLY SET FORTH IN NI.COM'S TERMS OF USE (http://ni.com/legal/termsofuse/unitedstates/us/).