NI-DAQmx: Creating a Custom Pulse Train Using Analog Output
Downloads
Filename: custom_pulse_generator.vi
Requirements: View
How to operate:
1) Specify high and low voltages for each phase of your pulse train
2) Specify initial delay for pulse train
3) Specify high and low times for pulses in pulse train
4) Set the output rate of the pulse train by specifying the "seconds per tick"
5) Run
Requirements
Filename: custom_pulse_generator.vi
Software Requirements
Application Software: LabVIEW Professional Development System 7.1, LabVIEW Base Development System 7.1, LabVIEW Full Development System 7.1
Language(s): LabVIEW
Hardware Requirements
Hardware Group: Multifunction DAQ (MIO)
Hardware Model: PXI-6255, PXI-6254, PXI-6280, PXI-6281, PXI-6284, PXI-6289, PCI-6023E, PCI-6024E, PCI-6025E, PCI-6031E, PCI-6032E, PCI-6033E, PCI-6034E, PCI-6035E, PCI-6036E, PCI-6040E (PCI-MIO-16E-4), PCI-6052E, PCI-6053E, PCI-6071E, PCI-6220, PCI-6221, PCI-6222, PCI-6224, PCI-6229, PCI-6250, PCI-6251, PCI-6254, PCI-6259, PXI-6011E, PXI-6023E, PXI-6024E, PXI-6025E, PXI-6030E, PXI-6031E, PXI-6032E, PXI-6033E, PXI-6035E, PXI-6040E, PXI-6052E, PXI-6053E, PXI-6070E, PXI-6071E, PXI-6115, PXI-6120, PXI-6122, PXI-6123, PXI-6132, PXI-6133, PXI-6143, PXI-6220, PXI-6221, PXI-6230, PXI-6224, PXI-6225, PXI-6229, PXI-6250, PXI-6251, PXI-6259
Driver: NI-DAQmx 9.2
Reader Comments | Submit a comment »
Legal
This example program (this "program") was developed by a National Instruments ("NI") Applications Engineer. Although technical support of this program may be made available by National Instruments, this program may not be completely tested and verified, and NI does not guarantee its quality in any way or that NI will continue to support this program with each new revision of related products and drivers. THIS EXAMPLE PROGRAM IS PROVIDED "AS IS" WITHOUT WARRANTY OF ANY KIND AND SUBJECT TO CERTAIN RESTRICTIONS AS MORE SPECIFICALLY SET FORTH IN NI.COM'S TERMS OF USE (http://ni.com/legal/termsofuse/unitedstates/us/).
