Academic Company Events NI Developer Zone Support Solutions Products & Services Contact NI MyNI

Document Type: Example Program
NI Supported: Yes
Publish Date: Sep 6, 2006

Subscribe

Add to Del.icio.us

DIGG this!


Feedback


Yes No

Related Categories

Products

Development Topic

Related Links - Developer Zone

Related Links - Products and Services

Programmatically Control a Current Stepping Motor

2 ratings | 3.00 out of 5
Print

Downloads

Filename: currentstepping.zip
Requirements: View

This VI is designed to be used with a stepper motor that can be controlled by a serial port. It automatically starts the motor, steps up the current to the desired level, and shuts it off after performing custom tasks.

You can import a text file of the commands needed for current stepping instead inputting them by hand.

Requirements


Filename: currentstepping.zip

Software Requirements


Application Software: LabVIEW Base Development System 7.0
Language(s): LabVIEW

 
2 ratings | 3.00 out of 5
Print

Reader Comments | Submit a comment »

 

Legal
This example program (this "program") was developed by a National Instruments ("NI") Applications Engineer. Although technical support of this program may be made available by National Instruments, this program may not be completely tested and verified, and NI does not guarantee its quality in any way or that NI will continue to support this program with each new revision of related products and drivers. THIS EXAMPLE PROGRAM IS PROVIDED "AS IS" WITHOUT WARRANTY OF ANY KIND AND SUBJECT TO CERTAIN RESTRICTIONS AS MORE SPECIFICALLY SET FORTH IN NI.COM'S TERMS OF USE (http://ni.com/legal/termsofuse/unitedstates/us/).