NI-SYNC Route DDS Clock or PXI_CLK10 to PXI_Star
PrintDownloads
Filename: ni_sync_clock_to_pxi_star.vi
Requirements: View
The purpose of this VI is to route the PXI_CLK10 or DDS Clock signal to the PXI_Star trigger line. Additionally, you can choose to route the oscillator of the 665x board to the PXI_CLK10 line to provide a more accurate PXI_CLK10 signal. The selected clock signal (PXI_CLK10 or DDS) is routed to the synchronization clock, which is in turn routed to the the PXI_Star line for slots 3-15. You can change which slots will receive the clock on the PXI_Star line by modifying the N input of the for loop which makes the PXI_Star routing strings. If you choose to do this, you will also need to change the N input of the disconnect trigger for loop such that is matches the N input of the connection for loop. After the user stops the VI with the STOP button, the routes are disconnected, the NI-SYNC session is closed and a check for errors is performed.
Hardware Required:
PXI-6653 or PXI-6652.
Connections Required:
No external connections required.
Requirements
Filename: ni_sync_clock_to_pxi_star.vi
Software Requirements
Application Software: LabVIEW Base Development System 7.0
Language(s): LabVIEW
Hardware Requirements
Hardware Group: PXI/CompactPCI
Hardware Model: PXI-6653, PXI-6652
Driver: NI-Sync 1.2
Reader Comments | Submit a comment »
Legal
This example program (this "program") was developed by a National Instruments ("NI") Applications Engineer. Although technical support of this program may be made available by National Instruments, this program may not be completely tested and verified, and NI does not guarantee its quality in any way or that NI will continue to support this program with each new revision of related products and drivers. THIS EXAMPLE PROGRAM IS PROVIDED "AS IS" WITHOUT WARRANTY OF ANY KIND AND SUBJECT TO CERTAIN RESTRICTIONS AS MORE SPECIFICALLY SET FORTH IN NI.COM'S TERMS OF USE (http://ni.com/legal/termsofuse/unitedstates/us/).