Academic Company Events NI Developer Zone Support Solutions Products & Services Contact NI MyNI

Document Type: Example Program
NI Supported: Yes
Publish Date: Sep 6, 2006

Correlated Digital Input with Analog Input Using M-Series - C#.NET

0 ratings | 0.00 out of 5
Print

Downloads

Filename: 2431.zip
Requirements: View

This example demonstrates how to continuosly acquire correlated digital input and analog input using an M-series DAQ card.

Instructions for running:
1. Select the analog physical channel.
2, Enter the minimum and maximum voltage ranges.
3. Set the rate of the acquisition. Also set the number of samples to read.
4. Select the digital physical channel/channels.
5. Select the correlated clock to use for your Digital input. (example: /Dev1/ai/SampleClock)


Related Links:
Performing Correlated Digital IO with an M Series Device in LabVIEW

Requirements


Filename: 2431.zip

Software Requirements


Application Software: Measurement Studio .NET Support 7.1
Language(s): C#
Additional Software: Visual Studio .NET 2003

Hardware Requirements


Hardware Group: Multifunction DAQ (MIO)
Hardware Model: PCI-6220, PCI-6289, PCI-6222, PCI-6224, PCI-6225, PCI-6229, PCI-6230, PCI-6250, PCI-6251, PCI-6254, PCI-6259, PCI-6280, PCI-6281, PCI-6284, PCI-6221
Driver: NI-DAQmx 7.4

 
0 ratings | 0.00 out of 5
Print

Reader Comments | Submit a comment »

 

Legal
This example program (this "program") was developed by a National Instruments ("NI") Applications Engineer. Although technical support of this program may be made available by National Instruments, this program may not be completely tested and verified, and NI does not guarantee its quality in any way or that NI will continue to support this program with each new revision of related products and drivers. THIS EXAMPLE PROGRAM IS PROVIDED "AS IS" WITHOUT WARRANTY OF ANY KIND AND SUBJECT TO CERTAIN RESTRICTIONS AS MORE SPECIFICALLY SET FORTH IN NI.COM'S TERMS OF USE (http://ni.com/legal/termsofuse/unitedstates/us/).