Academic Company Events NI Developer Zone Support Solutions Products & Services Contact NI MyNI

Document Type: Example Program
NI Supported: Yes
Publish Date: Sep 6, 2006

Digital Scan Clock Gating to Pause Data Acquisition

8 ratings | 4.50 out of 5
Print

Downloads

Filename: digital_scan_clock_gating.vi
Requirements: View

This LabVIEW example demonstrates the use digital scan clock gating to control the acquisition of analog data. See the LabVIEW Online Reference for more information about which boards support this feature. Digital scan clock gating is the operation by which an external TTL high or low signal can pause the acquisition of data.

Requirements


Filename: digital_scan_clock_gating.vi

Software Requirements


Application Software: LabVIEW Full Development System 7.0
Language(s): LabVIEW

Hardware Requirements


Hardware Group: Multifunction DAQ (MIO)
Driver: Traditional NI-DAQ (Legacy) 7.0

 
8 ratings | 4.50 out of 5
Print

Reader Comments | Submit a comment »

 

Legal
This example program (this "program") was developed by a National Instruments ("NI") Applications Engineer. Although technical support of this program may be made available by National Instruments, this program may not be completely tested and verified, and NI does not guarantee its quality in any way or that NI will continue to support this program with each new revision of related products and drivers. THIS EXAMPLE PROGRAM IS PROVIDED "AS IS" WITHOUT WARRANTY OF ANY KIND AND SUBJECT TO CERTAIN RESTRICTIONS AS MORE SPECIFICALLY SET FORTH IN NI.COM'S TERMS OF USE (http://ni.com/legal/termsofuse/unitedstates/us/).