E Series Buffered Semi Period Measurement with Measurement Studio
Print
This example program configures the counter of an E Series DAQ device for buffered semi period measurement. The signal is measured by connecting it to the GATE of the counter and gating the internal timebase.
Filename: 2561.zip
Application Software: Measurement Studio Visual Basic Support 6.0
Language(s): Basic
Hardware Group: Multifunction DAQ (MIO)
Hardware Model: DAQCard-6023E
Driver: Traditional NI-DAQ (Legacy) 6.9.0
Requirements
Filename: 2561.zip
Software Requirements
Application Software: Measurement Studio Visual Basic Support 6.0
Language(s): Basic
Hardware Requirements
Hardware Group: Multifunction DAQ (MIO)
Hardware Model: DAQCard-6023E
Driver: Traditional NI-DAQ (Legacy) 6.9.0
Reader Comments | Submit a comment »
Legal
This example program (this "program") was developed by a National Instruments ("NI") Applications Engineer. Although technical support of this program may be made available by National Instruments, this program may not be completely tested and verified, and NI does not guarantee its quality in any way or that NI will continue to support this program with each new revision of related products and drivers. THIS EXAMPLE PROGRAM IS PROVIDED "AS IS" WITHOUT WARRANTY OF ANY KIND AND SUBJECT TO CERTAIN RESTRICTIONS AS MORE SPECIFICALLY SET FORTH IN NI.COM'S TERMS OF USE (http://ni.com/legal/termsofuse/unitedstates/us/).