Determining the IP Address of an RT Series Controller on the Network
PrintDownloads
Filename: find_rt_controllers_61.llb
Requirements: View
Filename: find_controllers_6_0_3.zip
Requirements: View
You can run the attached LabVIEW 6.0.3 application on your Windows-based host machine to determine the IP addresses of all the RT controllers on your subnet programmatically. To run the application, you'll need the LabVIEW 6.0.3 Run-Time engine.
You can run the attached LabVIEW 6.1 LLB to determine the IP addresses of all the RT controllers on your subnet programmatically. You may also place this VI within your LabVIEW 6.1 or higher application code.
Requirements
Filename: find_rt_controllers_61.llb
Software Requirements
Application Software: LabVIEW Full Development System 6.1
Toolkits and Add-Ons: LabVIEW Real-Time Module 6.1
Language(s): LabVIEW
Software Requirements
Application Software: LabVIEW Full Development System 6.0.3
Toolkits and Add-Ons: LabVIEW Real-Time Module
Language(s): LabVIEW
Reader Comments | Submit a comment »
Legal
This example program (this "program") was developed by a National Instruments ("NI") Applications Engineer. Although technical support of this program may be made available by National Instruments, this program may not be completely tested and verified, and NI does not guarantee its quality in any way or that NI will continue to support this program with each new revision of related products and drivers. THIS EXAMPLE PROGRAM IS PROVIDED "AS IS" WITHOUT WARRANTY OF ANY KIND AND SUBJECT TO CERTAIN RESTRICTIONS AS MORE SPECIFICALLY SET FORTH IN NI.COM'S TERMS OF USE (http://ni.com/legal/termsofuse/unitedstates/us/).