Academic Company Events NI Developer Zone Support Solutions Products & Services Contact NI MyNI

Digital Pattern Generation using Multiple Arbitrary Waveform Generators

0 ratings | 0.00 out of 5
Print

Downloads

Filename: arbdgpat_lv51.zip
Requirements: View

Filename: arbdgpat_lv61.zip
Requirements: View

This example shows how to synchronize two arbitrary waveform generators using the niFgen APP Synchronization VI. Both arbitrary waveform generators are set up to use the 16-bit digital pattern outputs.

The data is simply an increasing sequence of numbers. There is the option for identical data on both cards, or the lower 16-bits on one card, and the higher 16-bits on the other card.

Important: To properly synchronize, the master board MUST be started last.

Requirements


Filename: arbdgpat_lv51.zip

Software Requirements


Application Software: LabVIEW Full Development System 5.1.1
Language(s): LabVIEW

Hardware Requirements


Hardware Group: Signal Source (AWG/FG/AO)
Hardware Model: PXI-5431, PCI-5411, PCI-5431, PXI-5411
Driver: NI-FGEN 1.0.1

 
Filename: arbdgpat_lv61.zip

Software Requirements


Application Software: LabVIEW Full Development System 6.1
Language(s): LabVIEW

Hardware Requirements


Hardware Group: Signal Source (AWG/FG/AO)
Hardware Model: PCI-5431, PXI-5411, PXI-5431, PCI-5411
Driver: NI-FGEN 2.0

 
0 ratings | 0.00 out of 5
Print

Reader Comments | Submit a comment »

 

Legal
This example program (this "program") was developed by a National Instruments ("NI") Applications Engineer. Although technical support of this program may be made available by National Instruments, this program may not be completely tested and verified, and NI does not guarantee its quality in any way or that NI will continue to support this program with each new revision of related products and drivers. THIS EXAMPLE PROGRAM IS PROVIDED "AS IS" WITHOUT WARRANTY OF ANY KIND AND SUBJECT TO CERTAIN RESTRICTIONS AS MORE SPECIFICALLY SET FORTH IN NI.COM'S TERMS OF USE (http://ni.com/legal/termsofuse/unitedstates/us/).