Academic Company Events NI Developer Zone Support Solutions Products & Services Contact NI MyNI

Document Type: Example Program
NI Supported: Yes
Publish Date: Sep 6, 2006

Subscribe

Add to Del.icio.us

DIGG this!


Feedback


Yes No

Related Categories

Products

Development Topic

Related Links - Developer Zone

Related Links - Products and Services

Demo of LabVIEW Remote Front Panels

1 ratings | 3.00 out of 5
Print

Downloads

Filename: webdemo.zip
Requirements: View

This demo shows how to use LabVIEW remote front panels and the LabVIEW Web Server to monitor and control applications on the Internet. This demo is best viewed with a display resolution of 1024x768. It uses Flash components so you must install a Flash plug-in to view it. It also uses JavaScript so you must use a Web browser with JavaScript enabled.

The VIs in this demo use a DAQcard (analog and digital acquisition) and a DAQ signal accessory. On a remote computer, the LabVIEW Run-Time Engine must be installed. On the server computer, you must have LabVIEW 6.1 or later. Read the attached readme file before installing the demo on your computer.

Requirements


Filename: webdemo.zip

Software Requirements


Application Software: LabVIEW 開發系統完整版 6.1
Language(s): LabVIEW

Hardware Requirements


Hardware Group: Multifunction DAQ (MIO)
Driver: 舊版 NI-DAQ

 
1 ratings | 3.00 out of 5
Print

Reader Comments | Submit a comment »

 

Legal
This example program (this "program") was developed by a National Instruments ("NI") Applications Engineer. Although technical support of this program may be made available by National Instruments, this program may not be completely tested and verified, and NI does not guarantee its quality in any way or that NI will continue to support this program with each new revision of related products and drivers. THIS EXAMPLE PROGRAM IS PROVIDED "AS IS" WITHOUT WARRANTY OF ANY KIND AND SUBJECT TO CERTAIN RESTRICTIONS AS MORE SPECIFICALLY SET FORTH IN NI.COM'S TERMS OF USE (http://ni.com/legal/termsofuse/unitedstates/us/).