Academic Company Events NI Developer Zone Support Solutions Products & Services Contact NI MyNI

Document Type: Example Program
NI Supported: Yes
Publish Date: Sep 6, 2006

Read a Channel, One Point at a Time, Immediately from an SCXI-1126 Frequency Input Module.

0 ratings | 0.00 out of 5
Print

Downloads

Filename: scxi_freqonepoint.zip
Requirements: View

This example illustrates how to read one channel, one point at a time, immediately from an SCXI-1126 frequency input module. The example adds special function calls to set input frequency range, cutoff frequency and voltage threshold (2.1V for TTL). (Only for the SCXI-1126 module)

Requirements


Filename: scxi_freqonepoint.zip

Software Requirements


Application Software: LabWindows/CVI Full Development System 5.5
Language(s): C

Hardware Requirements


Hardware Group: Multifunction DAQ (MIO)
Driver: Traditional NI-DAQ (Legacy)

 
0 ratings | 0.00 out of 5
Print

Reader Comments | Submit a comment »

 

Legal
This example program (this "program") was developed by a National Instruments ("NI") Applications Engineer. Although technical support of this program may be made available by National Instruments, this program may not be completely tested and verified, and NI does not guarantee its quality in any way or that NI will continue to support this program with each new revision of related products and drivers. THIS EXAMPLE PROGRAM IS PROVIDED "AS IS" WITHOUT WARRANTY OF ANY KIND AND SUBJECT TO CERTAIN RESTRICTIONS AS MORE SPECIFICALLY SET FORTH IN NI.COM'S TERMS OF USE (http://ni.com/legal/termsofuse/unitedstates/us/).