Academic Company Events NI Developer Zone Support Solutions Products & Services Contact NI MyNI

Document Type: Example Program
NI Supported: Yes
Publish Date: Sep 6, 2006

Subscribe

Add to Del.icio.us

DIGG this!


Feedback


Yes No

Related Categories

Products

Development Topic

Related Links - Developer Zone

Related Links - Products and Services

Amplitude Modulation (AM) using MathScript

1 ratings | 5.00 out of 5
Print

Downloads

Filename: amplitudemodulation.zip
Requirements: View

In this example, a carrier signal and message signal are amplitude modulated to create an AM signal, using MathScript. The phase and frequency of the carrier and message signals can be modified on-the-fly, while the resulting AM signal is updated immediately. You can also change the modulation index and see its effects on the modulated signal to give you a better understanding of this modulation technique.

Requirements


Filename: amplitudemodulation.zip

Software Requirements


Application Software: LabVIEW Full Development System 8.0
Language(s): LabVIEW

 
1 ratings | 5.00 out of 5
Print

Reader Comments | Submit a comment »

 

Legal
This example program (this "program") was developed by a National Instruments ("NI") Applications Engineer. Although technical support of this program may be made available by National Instruments, this program may not be completely tested and verified, and NI does not guarantee its quality in any way or that NI will continue to support this program with each new revision of related products and drivers. THIS EXAMPLE PROGRAM IS PROVIDED "AS IS" WITHOUT WARRANTY OF ANY KIND AND SUBJECT TO CERTAIN RESTRICTIONS AS MORE SPECIFICALLY SET FORTH IN NI.COM'S TERMS OF USE (http://ni.com/legal/termsofuse/unitedstates/us/).