Academic Company Events NI Developer Zone Support Solutions Products & Services Contact NI MyNI

Document Type: Example Program
NI Supported: Yes
Publish Date: Sep 6, 2006


Feedback


Yes No

Related Categories

Products

Development Topic

Related Links - Developer Zone

Related Links - Products and Services

Accessing Unused DIO Lines of an E Series Device when using SCXI and Traditional DAQ

0 ratings | 0.00 out of 5
Print

Downloads

Filename: e_ser_dig.vi
Requirements: View

When you have an E Series board configured to control an SCXI Chassis, digital lines 0, 1, 2, and 4 on port 0 are reserved for SCXI communication. If you try to access these reserved lines from an application, you will receive error -10440. This Example Program demonstrates how to access the unused DIO lines of an E Series device configured to control an SCXI Chassis. Line masking must be implemented before performing a read or a write on the digital port.

Requirements


Filename: e_ser_dig.vi

Software Requirements


Application Software: LabVIEW Base Development System 7.0
Language(s): LabVIEW

Hardware Requirements


Hardware Group: Multifunction DAQ (MIO)
Driver: Traditional NI-DAQ (Legacy) 7.0

 
0 ratings | 0.00 out of 5
Print

Reader Comments | Submit a comment »

 

Legal
This example program (this "program") was developed by a National Instruments ("NI") Applications Engineer. Although technical support of this program may be made available by National Instruments, this program may not be completely tested and verified, and NI does not guarantee its quality in any way or that NI will continue to support this program with each new revision of related products and drivers. THIS EXAMPLE PROGRAM IS PROVIDED "AS IS" WITHOUT WARRANTY OF ANY KIND AND SUBJECT TO CERTAIN RESTRICTIONS AS MORE SPECIFICALLY SET FORTH IN NI.COM'S TERMS OF USE (http://ni.com/legal/termsofuse/unitedstates/us/).