Ready-to-Run Strain Measurement
PrintDownloads
Filename: strainmeasurement.zip
Requirements: View
This example program is a ready-to-run strain measurement application. It demonstrates the look and feel of a strain measurement application designed using LabVIEW and the NI-DAQmx driver software for National Instruments data acquisition hardware. This application has two modes of execution. Simulated Mode will allow you to interact with the application without any data acquisition hardware. Measurement Mode requires your NI hardware and driver software be installed. The example is in executable format and requires only the LabVIEW 7.1 Run-Time Engine to run. If you do have the LabVIEW Run-time Engine, follow the link below to download and install it for free.
| Related Links: |
| LabVIEW 7.1 Run-time Engine (Free Download) |
Requirements
Filename: strainmeasurement.zip
Software Requirements
Language(s): LabVIEW
Hardware Requirements
Hardware Group: Multifunction DAQ (MIO)
Driver: NI-DAQmx 7.1
Reader Comments | Submit a comment »
Legal
This example program (this "program") was developed by a National Instruments ("NI") Applications Engineer. Although technical support of this program may be made available by National Instruments, this program may not be completely tested and verified, and NI does not guarantee its quality in any way or that NI will continue to support this program with each new revision of related products and drivers. THIS EXAMPLE PROGRAM IS PROVIDED "AS IS" WITHOUT WARRANTY OF ANY KIND AND SUBJECT TO CERTAIN RESTRICTIONS AS MORE SPECIFICALLY SET FORTH IN NI.COM'S TERMS OF USE (http://ni.com/legal/termsofuse/unitedstates/us/).