Adding a DC Offset to Video Lines
PrintDownloads
Filename: dcoffset.zip
Requirements: View
The VI opens an NI-Video file waveform and adds an offset voltage to each line in the video waveform. You select a voltage increment, and a maximum positive and negative voltage offset. The VI automatically increases the offset by the desired increment by each line sequentially until it reaches the maximum positive offset. At this point, the VI starts decreasing the offset by the desired increment until it reaches the maximum negative offset.
You are then prompted to save the new NI-Video binary waveform file for later use. You can easily modify the VI to be included in a higher lever VI to modify waveform files as they are opened and downloaded.
Requirements
Filename: dcoffset.zip
Software Requirements
Application Software: LabVIEW Full Development System 6.0
Language(s): LabVIEW
Hardware Requirements
Hardware Group: Signal Source (AWG/FG/AO)
Hardware Model: PXI-5431, PCI-5431
Driver: Traditional NI-DAQ (Legacy) 6.9.3, NI-Video 1.0, NI-FGEN 1.5.1
Reader Comments | Submit a comment »
Legal
This example program (this "program") was developed by a National Instruments ("NI") Applications Engineer. Although technical support of this program may be made available by National Instruments, this program may not be completely tested and verified, and NI does not guarantee its quality in any way or that NI will continue to support this program with each new revision of related products and drivers. THIS EXAMPLE PROGRAM IS PROVIDED "AS IS" WITHOUT WARRANTY OF ANY KIND AND SUBJECT TO CERTAIN RESTRICTIONS AS MORE SPECIFICALLY SET FORTH IN NI.COM'S TERMS OF USE (http://ni.com/legal/termsofuse/unitedstates/us/).