Running a Vision Builder AI Inspection From TestStand
PrintThis example provides the files necessary to install the Vision Builder AI Inspection step to TestStand 3.0 or later. This example also provides a sample TestStand sequence file using the Vision Builder AI Inspection step and an Operator Interface, created using Microsoft Visual Basic 6.0, for viewing images in TestStand.
If you only have Vision Builder AI 2.6.1 and any version of TestStand installed, use ts_vbai_261_only.zip. For all other installation configurations, including later versions of Vision Builder AI or multiple versions of Vision Builder AI, use ts_vbai_all.zip.
Reader Comments | Submit a comment »
Legal
This example program (this "program") was developed by a National Instruments ("NI") Applications Engineer. Although technical support of this program may be made available by National Instruments, this program may not be completely tested and verified, and NI does not guarantee its quality in any way or that NI will continue to support this program with each new revision of related products and drivers. THIS EXAMPLE PROGRAM IS PROVIDED "AS IS" WITHOUT WARRANTY OF ANY KIND AND SUBJECT TO CERTAIN RESTRICTIONS AS MORE SPECIFICALLY SET FORTH IN NI.COM'S TERMS OF USE (http://ni.com/legal/termsofuse/unitedstates/us/).