Academic Company Events NI Developer Zone Support Solutions Products & Services Contact NI MyNI

Document Type: Example Program
NI Supported: Yes
Publish Date: Sep 20, 2006

Snap and Grab with NI-IMAQ for IEEE 1394 Cameras in C#

0 ratings | 0.00 out of 5
Print

Downloads

Filename: snapgrab1394.zip
Requirements: View

The following example performs a snap and a grab using NI-IMAQ for IEEE 1394 Cameras, and displays the image on an image control. This example is based on the existing VB.NET examples, Snap1394.vb and Grab1394.vb, that ship with the NI Vision Development Module.

Snap acquires one image at a time and is appropriate for low-speed or single-capture applications. Grab acquires images continuously and is appropriate for high-speed applications in which you need to process only one image at a time.

Requirements


Filename: snapgrab1394.zip

Software Requirements


Application Software: Measurement Studio .NET Support 7.1
Toolkits and Add-Ons: LabVIEW Vision Development Module 2009
Language(s): C#

Hardware Requirements


Hardware Group: Vision (IMAQ)
Hardware Model: CVS-1456, NI PCIe-8255R, NI PCIe-8254R, PCI-8254R
Driver: NI-IMAQ for IEEE 1394 Cameras 2.0.2

 
0 ratings | 0.00 out of 5
Print

Reader Comments | Submit a comment »

 

Legal
This example program (this "program") was developed by a National Instruments ("NI") Applications Engineer. Although technical support of this program may be made available by National Instruments, this program may not be completely tested and verified, and NI does not guarantee its quality in any way or that NI will continue to support this program with each new revision of related products and drivers. THIS EXAMPLE PROGRAM IS PROVIDED "AS IS" WITHOUT WARRANTY OF ANY KIND AND SUBJECT TO CERTAIN RESTRICTIONS AS MORE SPECIFICALLY SET FORTH IN NI.COM'S TERMS OF USE (http://ni.com/legal/termsofuse/unitedstates/us/).