Serial Output with the NI 6533 and 6534
PrintDownloads
Filename: serial_output_33_34.llb
Requirements: View
With this VI, you can convert 8-bit data to 4-bit, 2-bit, or serial (1-bit) data, then transfer the data to another device.
For complete instructions, refer to link below for the "Serial I/O with the NI 6533 and 6534" NI Developer Zone document.
| Related Links: |
| NI Developer Zone: Serial I/O with the NI 6533 and 6534 |
Requirements
Filename: serial_output_33_34.llb
Software Requirements
Application Software: LabVIEW Full Development System 6.1
Hardware Requirements
Hardware Model: PCI-6533, PXI-6534, PXI-6533, PCI-6534
Driver: Traditional NI-DAQ (Legacy) 6.9.0
Reader Comments | Submit a comment »
Legal
This example program (this "program") was developed by a National Instruments ("NI") Applications Engineer. Although technical support of this program may be made available by National Instruments, this program may not be completely tested and verified, and NI does not guarantee its quality in any way or that NI will continue to support this program with each new revision of related products and drivers. THIS EXAMPLE PROGRAM IS PROVIDED "AS IS" WITHOUT WARRANTY OF ANY KIND AND SUBJECT TO CERTAIN RESTRICTIONS AS MORE SPECIFICALLY SET FORTH IN NI.COM'S TERMS OF USE (http://ni.com/legal/termsofuse/unitedstates/us/).