Academic Company Events NI Developer Zone Support Solutions Products & Services Contact NI MyNI

Document Type: Example Program
NI Supported: Yes
Publish Date: Sep 6, 2006

DAQmx - Getting the Min, Max, Gain and Attenuation Properties From a SCXI Physical Channel

0 ratings | 0.00 out of 5
Print

Downloads

Filename: scxi_ai_max_input_range.vi
Requirements: View

This example VI uses a DAQmx physical channel to return the maximum analog input range for a DAQ device or SCXI system. If the physical channel is on an SCXI module, this example will also return the module's Gain and the terminal block's Attenuation. If the device is programmable, then the returned data will represent the settings which would maximize the signal range. For jumper configurable devices, this program is useful for returning the gain and attenuation settings from MAX programmatically.

Requirements


Filename: scxi_ai_max_input_range.vi

Software Requirements


Application Software: LabVIEW Full Development System 7.0
Language(s): LabVIEW

Hardware Requirements


Hardware Group: SCC, Multifunction DAQ (MIO), SCXI
Driver: NI-DAQmx 7.3

 
0 ratings | 0.00 out of 5
Print

Reader Comments | Submit a comment »

 

Legal
This example program (this "program") was developed by a National Instruments ("NI") Applications Engineer. Although technical support of this program may be made available by National Instruments, this program may not be completely tested and verified, and NI does not guarantee its quality in any way or that NI will continue to support this program with each new revision of related products and drivers. THIS EXAMPLE PROGRAM IS PROVIDED "AS IS" WITHOUT WARRANTY OF ANY KIND AND SUBJECT TO CERTAIN RESTRICTIONS AS MORE SPECIFICALLY SET FORTH IN NI.COM'S TERMS OF USE (http://ni.com/legal/termsofuse/unitedstates/us/).