Academic Company Events NI Developer Zone Support Solutions Products & Services Contact NI MyNI

Document Type: Example Program
NI Supported: Yes
Publish Date: Sep 6, 2006

Set SCXI-1520 Potentiometers Using NI-DAQ Function Calls in CVI.

0 ratings | 0.00 out of 5
Print

Downloads

Filename: 202072.zip
Requirements: View

This program sets the coarse and fine potentiometers on one channel of the SCXI-1520 to their full-scale values. Valid values are from 0 to full scale for both potentiometers.

You may need to include the nidaq32.lib library in your project for the program to build.
Please refer to the KnowledgeBase linked below for more information.


Related Links:
KnowledgeBase 2HTFLPUJ: How Can I Set the Nulling Potentiometers of the SCXI-1520 with NI-DAQ Function Calls?

Requirements


Filename: 202072.zip

Software Requirements


Application Software: LabWindows/CVI Full Development System 6.0
Language(s): C, C++, Visual Basic

Hardware Requirements


Hardware Group: Multifunction DAQ (MIO)
Driver: Traditional NI-DAQ (Legacy) 6.9.1

 
0 ratings | 0.00 out of 5
Print

Reader Comments | Submit a comment »

 

Legal
This example program (this "program") was developed by a National Instruments ("NI") Applications Engineer. Although technical support of this program may be made available by National Instruments, this program may not be completely tested and verified, and NI does not guarantee its quality in any way or that NI will continue to support this program with each new revision of related products and drivers. THIS EXAMPLE PROGRAM IS PROVIDED "AS IS" WITHOUT WARRANTY OF ANY KIND AND SUBJECT TO CERTAIN RESTRICTIONS AS MORE SPECIFICALLY SET FORTH IN NI.COM'S TERMS OF USE (http://ni.com/legal/termsofuse/unitedstates/us/).