Academic Company Events NI Developer Zone Support Solutions Products & Services Contact NI MyNI

Document Type: Example Program
NI Supported: Yes
Publish Date: Sep 6, 2006

SCXI and NI-DAQ Series: SCXI Strain - Single Buffered

0 ratings | 0.00 out of 5
Print

Downloads

Filename: 202114.zip
Requirements: View

This example program is part of a series of examples that demonstrate the use of SCXI equipment with NI-DAQ function calls. Please refer to the link below, SCXI Example Programs with NI-DAQ Function Calls, for a reference to all of the SCXI/NI-DAQ examples programs.

Here is a short description of this program: read four strain gauges at the same settings from an SCXI-1520 module into a buffer using internal scan and sample timing. The DAQ device must have a scan clock and a channel clock. Please refer to the code for full documentation.


Related Links:
SCXI Example Programs with NI-DAQ Function Calls

Requirements


Filename: 202114.zip

Software Requirements


Application Software: LabWindows/CVI Full Development System 6.0
Language(s): C

Hardware Requirements


Hardware Group: Multifunction DAQ (MIO)
Driver: Traditional NI-DAQ (Legacy) 6.9.1

 
0 ratings | 0.00 out of 5
Print

Reader Comments | Submit a comment »

 

Legal
This example program (this "program") was developed by a National Instruments ("NI") Applications Engineer. Although technical support of this program may be made available by National Instruments, this program may not be completely tested and verified, and NI does not guarantee its quality in any way or that NI will continue to support this program with each new revision of related products and drivers. THIS EXAMPLE PROGRAM IS PROVIDED "AS IS" WITHOUT WARRANTY OF ANY KIND AND SUBJECT TO CERTAIN RESTRICTIONS AS MORE SPECIFICALLY SET FORTH IN NI.COM'S TERMS OF USE (http://ni.com/legal/termsofuse/unitedstates/us/).