Academic Company Events NI Developer Zone Support Solutions Products & Services Contact NI MyNI

Document Type: Example Program
NI Supported: Yes
Publish Date: Sep 6, 2006

Simultaneous Digital I/O and Event Counting with a 6602 Board

6 ratings | 2.50 out of 5
Print

Downloads

Filename: 6602_digital_and_freq_meas.zip
Requirements: View

This VI shows how to configure the PCI-6602 board to use the 32-bit digital port and perform a counting application at the same time. The subVI determines which counters you are using and makes sure that you don't set them up for output or write to them with the line mask.

Requirements


Filename: 6602_digital_and_freq_meas.zip

Software Requirements


Application Software: LabVIEW Full Development System 5.0
Language(s): LabVIEW

Hardware Requirements


Hardware Group: Multifunction DAQ (MIO)
Driver: Traditional NI-DAQ (Legacy) 6.5.1

 
6 ratings | 2.50 out of 5
Print

Reader Comments | Submit a comment »

 

Legal
This example program (this "program") was developed by a National Instruments ("NI") Applications Engineer. Although technical support of this program may be made available by National Instruments, this program may not be completely tested and verified, and NI does not guarantee its quality in any way or that NI will continue to support this program with each new revision of related products and drivers. THIS EXAMPLE PROGRAM IS PROVIDED "AS IS" WITHOUT WARRANTY OF ANY KIND AND SUBJECT TO CERTAIN RESTRICTIONS AS MORE SPECIFICALLY SET FORTH IN NI.COM'S TERMS OF USE (http://ni.com/legal/termsofuse/unitedstates/us/).