Academic Company Events NI Developer Zone Support Solutions Products & Services Contact NI MyNI

Document Type: Example Program
NI Supported: Yes
Publish Date: Sep 6, 2006

Scanning with a SCXI-1160 or SCXI-1161 configured as a Multiplexer Using a National Instruments DMM

2 ratings | 3.00 out of 5
Print

Downloads

Filename: scxi-116x_mux.vi
Requirements: View

You can configure the SCXI-1160 and SCXI-1161 general-purpose switch/relay modules to multiplex signals from several sources to a single output that is read by a NI 4060 DMM (5 1/2 digits). The connection list for turning these independent relays into a multiplexer is contained in the LabVIEW menu under File>>VI Properties>>Documentation.

Requirements


Filename: scxi-116x_mux.vi

Software Requirements


Application Software: LabVIEW Full Development System 6.0
Language(s): LabVIEW

Hardware Requirements


Hardware Group: Multifunction DAQ (MIO)
Driver: Traditional NI-DAQ (Legacy) 6.9.0

 
2 ratings | 3.00 out of 5
Print

Reader Comments | Submit a comment »

 

Legal
This example program (this "program") was developed by a National Instruments ("NI") Applications Engineer. Although technical support of this program may be made available by National Instruments, this program may not be completely tested and verified, and NI does not guarantee its quality in any way or that NI will continue to support this program with each new revision of related products and drivers. THIS EXAMPLE PROGRAM IS PROVIDED "AS IS" WITHOUT WARRANTY OF ANY KIND AND SUBJECT TO CERTAIN RESTRICTIONS AS MORE SPECIFICALLY SET FORTH IN NI.COM'S TERMS OF USE (http://ni.com/legal/termsofuse/unitedstates/us/).