VB.NET NI-SCOPE - Simple Read
PrintDownloads
Filename: simplereadtraditional.zip
Requirements: View
This program, using a .NET NI-SCOPE wrapper, does a simple single channel read on an NI digitizer.
This example achieves the same result as the NI-SCOPE Getting Started Examples for LabVIEW and C. This example uses the Visual Basic .NET wrapper that can be downloaded using the link in the related links section below. The current NI-SCOPE driver (3.2 and later) has native .NET support and does not require the wrapper. To download and install the native .NET support and it's examples you will need to install the NI-SCOPE .NET Class Library (see link below).
Requirements
Filename: simplereadtraditional.zip
Software Requirements
Language(s): Visual Basic .NET
Hardware Requirements
Hardware Group: High-Speed Digitizers (Scopes)
Driver: NI-SCOPE 2.7
Reader Comments | Submit a comment »
Legal
This example program (this "program") was developed by a National Instruments ("NI") Applications Engineer. Although technical support of this program may be made available by National Instruments, this program may not be completely tested and verified, and NI does not guarantee its quality in any way or that NI will continue to support this program with each new revision of related products and drivers. THIS EXAMPLE PROGRAM IS PROVIDED "AS IS" WITHOUT WARRANTY OF ANY KIND AND SUBJECT TO CERTAIN RESTRICTIONS AS MORE SPECIFICALLY SET FORTH IN NI.COM'S TERMS OF USE (http://ni.com/legal/termsofuse/unitedstates/us/).