Academic Company Events NI Developer Zone Support Solutions Products & Services Contact NI MyNI

Document Type: Example Program
NI Supported: Yes
Publish Date: Sep 6, 2006

Subscribe

Add to Del.icio.us

DIGG this!


Feedback


Yes No

Related Categories

Products

Development Topic

Related Links - Developer Zone

Related Links - Products and Services

Handshaking with PCI-DIO-32HS in Borland Delphi

2 ratings | 2.00 out of 5
Print

Downloads

Filename: 32hsdelphi.zip
Requirements: View

This example demonstrates how to perform 8255 emulation mode handshaking with the DIO-32HS (6533) digital boards. The example is written using ComponentWorks 2.0 DAQ controls in Borland Delphi 4. This example allows you to configure a set of ports for input and another for output so that you have synchronized input and output. Make sure that you connect the appropriate handshaking signals from your external device to the hardware.

Requirements


Filename: 32hsdelphi.zip

Software Requirements


Application Software: Measurement Studio Visual Basic Support 2.0
Language(s): Delphi

Hardware Requirements


Hardware Group: Digital I/O (DIO)
Hardware Model: PXI-7030/6533, PCI-7030/6533, PCI-7040/6533, DAQPad-6533 for IEEE 1394, PXI-6534, DAQCard-6533, PCI-6534, PXI-6533, PXI-7040/6533
Driver: Traditional NI-DAQ (Legacy) 6.5.0

 
2 ratings | 2.00 out of 5
Print

Reader Comments | Submit a comment »

 

Legal
This example program (this "program") was developed by a National Instruments ("NI") Applications Engineer. Although technical support of this program may be made available by National Instruments, this program may not be completely tested and verified, and NI does not guarantee its quality in any way or that NI will continue to support this program with each new revision of related products and drivers. THIS EXAMPLE PROGRAM IS PROVIDED "AS IS" WITHOUT WARRANTY OF ANY KIND AND SUBJECT TO CERTAIN RESTRICTIONS AS MORE SPECIFICALLY SET FORTH IN NI.COM'S TERMS OF USE (http://ni.com/legal/termsofuse/unitedstates/us/).