FieldPoint Analog Output Example - FP-AO-2xx Modules (LabVIEW 6.1)
PrintDownloads
Filename: fp_ao_2xx.vi
Requirements: View
FP Open.vi
FP Create Tag.vi
FP Write (Polymorphic).vi
FP Close.vi
These FieldPoint VIs are installed with FieldPoint.
INSTRUCTIONS:
1. Select the FP module to use.
2. Specify the "IAK File Path", or leave it blank and the VI will use the most recently used IAK file.
3. Edit the "Comm Resource Name", "Device Name", and "Item Name" inputs
to match the IAK file configuration that you created in FieldPoint Explorer.
4. Close FieldPoint Explorer.
5. Run this VI.
NOTE: This VI is a combination of two example VIs shipped with FieldPoint. These two VIs, FP-AO-200.vi and FP-AO-210.vi, can be found on your local hard drive at:
C:\Program Files\National Instruments\LabVIEW\examples\FieldPoint\Analog Out
Requirements
Filename: fp_ao_2xx.vi
Software Requirements
Application Software: LabVIEW Full Development System 6.1
Language(s): LabVIEW
Hardware Requirements
Hardware Group: FieldPoint
Reader Comments | Submit a comment »
Legal
This example program (this "program") was developed by a National Instruments ("NI") Applications Engineer. Although technical support of this program may be made available by National Instruments, this program may not be completely tested and verified, and NI does not guarantee its quality in any way or that NI will continue to support this program with each new revision of related products and drivers. THIS EXAMPLE PROGRAM IS PROVIDED "AS IS" WITHOUT WARRANTY OF ANY KIND AND SUBJECT TO CERTAIN RESTRICTIONS AS MORE SPECIFICALLY SET FORTH IN NI.COM'S TERMS OF USE (http://ni.com/legal/termsofuse/unitedstates/us/).