Synchronized High-Speed Digital Output and DAQmx Analog Output
Downloads
Filename: hsdio_daqmx_sync.llb
Requirements: View
NOTE: Both NI devices must be recognized in the same chassis in Measurement and Automation Explorer (MAX). To ensure this, in MAX right click on 'PXI System' and select 'Identify As.' Once the correct chassis has been chosen, the devices should be listed under the PXI chassis. The example can now be run.
Requirements
Filename: hsdio_daqmx_sync.llb
Software Requirements
Application Software: LabVIEW Full Development System 8.0
Language(s): LabVIEW
Hardware Requirements
Hardware Group: Multifunction DAQ (MIO), Digital I/O (DIO)
Hardware Model: PCI-6541, PCI-6542, PCI-6551, PCI-6552, PCI-6561, PCI-6562, PXI-6289, PXI-6225, PXI-6229, PXI-6251, PXI-6255, PXI-6259, PXI-6281, PXI-6221
Driver: NI-HSDIO 1.4, NI-DAQmx 8.0
Reader Comments | Submit a comment »
Legal
This example program (this "program") was developed by a National Instruments ("NI") Applications Engineer. Although technical support of this program may be made available by National Instruments, this program may not be completely tested and verified, and NI does not guarantee its quality in any way or that NI will continue to support this program with each new revision of related products and drivers. THIS EXAMPLE PROGRAM IS PROVIDED "AS IS" WITHOUT WARRANTY OF ANY KIND AND SUBJECT TO CERTAIN RESTRICTIONS AS MORE SPECIFICALLY SET FORTH IN NI.COM'S TERMS OF USE (http://ni.com/legal/termsofuse/unitedstates/us/).
