Academic Company Events NI Developer Zone Support Solutions Products & Services Contact NI MyNI

Frequency Shift Keying with Measurement Studio for Visual Basic

3 ratings | 2.33 out of 5
Print

Downloads

Filename: frequency_shift_keying.zip
Requirements: View

This program configures a counter for continuous pulse generation. The program generates a continuous pulse at one frequency when the default GATE of the counter is low and a different frequency when the GATE is high.

Requirements


Filename: frequency_shift_keying.zip

Software Requirements


Application Software: Measurement Studio Visual Basic Support 6.0
Language(s): Visual Basic
Additional Software: Visual Basic 6.0

Hardware Requirements


Hardware Group: Multifunction DAQ (MIO), Counter/Timers (TIO)
Driver: Traditional NI-DAQ (Legacy) 6.9.0

 
3 ratings | 2.33 out of 5
Print

Reader Comments | Submit a comment »

 

Legal
This example program (this "program") was developed by a National Instruments ("NI") Applications Engineer. Although technical support of this program may be made available by National Instruments, this program may not be completely tested and verified, and NI does not guarantee its quality in any way or that NI will continue to support this program with each new revision of related products and drivers. THIS EXAMPLE PROGRAM IS PROVIDED "AS IS" WITHOUT WARRANTY OF ANY KIND AND SUBJECT TO CERTAIN RESTRICTIONS AS MORE SPECIFICALLY SET FORTH IN NI.COM'S TERMS OF USE (http://ni.com/legal/termsofuse/unitedstates/us/).