UDP Send/Spray and Receive
PrintThis library contains a send/receive pair of VIs that demonstrate how to send and receive data using the LabVIEW UDP VIs. First run the Receive VI, then run the Send VI and watch the data appear in the data indicator of the Receive VI.
You can also configure the sender to broadcast to the entire subnet (UDP broadcast) instead of just sending to one host.
The attachment called udpex.zip is saved in LV version 4.1. Use this attachment if you are using LV 4.1 through LV 7.0.
The attachment called udp71.zip is saved in LV version 7.1. Use this attachment if you are using LV 7.1 and higher. The 7.1 and higher files can also be found by searching for UDP in the example finder. To find them there, go to Help>>Find Examples. Click on the search tab and search for UDP. The 2 files are called UDP Sender.vi and UDP Receiver.vi.
Requirements
Filename: udp71.zip
Software Requirements
Application Software: LabVIEW Base Development System 7.1
Language(s): LabVIEW
Software Requirements
Application Software: LabVIEW Full Development System 4.1
Language(s): LabVIEW
Reader Comments | Submit a comment »
very old version
- Jun 26, 2008
Legal
This example program (this "program") was developed by a National Instruments ("NI") Applications Engineer. Although technical support of this program may be made available by National Instruments, this program may not be completely tested and verified, and NI does not guarantee its quality in any way or that NI will continue to support this program with each new revision of related products and drivers. THIS EXAMPLE PROGRAM IS PROVIDED "AS IS" WITHOUT WARRANTY OF ANY KIND AND SUBJECT TO CERTAIN RESTRICTIONS AS MORE SPECIFICALLY SET FORTH IN NI.COM'S TERMS OF USE (http://ni.com/legal/termsofuse/unitedstates/us/).