Academic Company Events NI Developer Zone Support Solutions Products & Services Contact NI MyNI

Document Type: Example Program
NI Supported: Yes
Publish Date: Sep 6, 2006

Analog Output Using SCC-FT01 (LabVIEW 6.1)

1 ratings | 5.00 out of 5
Print

Downloads

Filename: scc-ft01.vi
Requirements: View

This example uses an analog output channel of a National Instruments data acquisition (DAQ) device to produce the desired voltage. The voltage is then available on the SCC-FT01 feedthrough module.

VIs Used in this Example:
AOUpdateChannel.vi

Pin Connection Information:
The desired analog output voltage will appear between the CH+, pin 2, and CH-, pin 3, terminals marked on the cover of the SCC-FT01. When used for analog output, the CH- terminal is connected to analog output ground (AOGND).
For further I/O connection details, please refer to your hardware user documentation.

Requirements


Filename: scc-ft01.vi

Software Requirements


Application Software: LabVIEW Full Development System 6.1
Language(s): LabVIEW

Hardware Requirements


Hardware Group: Multifunction DAQ (MIO)
Driver: Traditional NI-DAQ (Legacy) 6.9.3

 
1 ratings | 5.00 out of 5
Print

Reader Comments | Submit a comment »

 

Legal
This example program (this "program") was developed by a National Instruments ("NI") Applications Engineer. Although technical support of this program may be made available by National Instruments, this program may not be completely tested and verified, and NI does not guarantee its quality in any way or that NI will continue to support this program with each new revision of related products and drivers. THIS EXAMPLE PROGRAM IS PROVIDED "AS IS" WITHOUT WARRANTY OF ANY KIND AND SUBJECT TO CERTAIN RESTRICTIONS AS MORE SPECIFICALLY SET FORTH IN NI.COM'S TERMS OF USE (http://ni.com/legal/termsofuse/unitedstates/us/).