Academic Company Events NI Developer Zone Support Solutions Products & Services Contact NI MyNI

Hardware-in-the-Loop (HIL) Testing using LabVIEW Real-Time and CarSim

1 ratings | 5.00 out of 5
Print

Downloads

Filename: lvcarsimdemo.zip
Requirements: View

This example uses LabVIEW and Mechanical Simulation Corporation CarSim to develop a HIL tester to evaluate the performance of an ABS electronic control unit (ECU). For details of this demo, see the Application Note below.

Related Links:
Applciation Note: HIL (Hardware-in-the-Loop) Evaluation using LabVIEW Real-Time and CarSim

Requirements


Filename: lvcarsimdemo.zip

Software Requirements


Application Software: LabVIEW Full Development System 7.0
Toolkits and Add-Ons: LabVIEW Real-Time Module 7.0, LabVIEW Simulation Interface Toolkit 2.0, LabVIEW FPGA Module 1.0
Language(s): LabVIEW

Hardware Requirements


Hardware Group: Reconfigurable I/O (RIO)
Hardware Model: PXI-7831R
Driver: NI-RIO 1.0

 
1 ratings | 5.00 out of 5
Print

Reader Comments | Submit a comment »

 

Legal
This example program (this "program") was developed by a National Instruments ("NI") Applications Engineer. Although technical support of this program may be made available by National Instruments, this program may not be completely tested and verified, and NI does not guarantee its quality in any way or that NI will continue to support this program with each new revision of related products and drivers. THIS EXAMPLE PROGRAM IS PROVIDED "AS IS" WITHOUT WARRANTY OF ANY KIND AND SUBJECT TO CERTAIN RESTRICTIONS AS MORE SPECIFICALLY SET FORTH IN NI.COM'S TERMS OF USE (http://ni.com/legal/termsofuse/unitedstates/us/).