Synchronize DAQ Scan Clock with IMAQ Acquisition
PrintDownloads
Filename: 202660.llb
Requirements: View
Filename: synchronize_daq-imaq.zip
Requirements: View
The first example has the scan clock configured in the property pages for RTSI line 0, and the VSYNC pulse is sent, programmatically, from the IMAQ board to RTSI line 0. This example is designed to work with a RTSI cable, but could easily work with external lines as well. This example is written in Visual Basic.
The second example has the same functionality, but is written in LabVIEW. The DAQ results are also overlayed on the image.
| Related Links: |
| DAQ Triggering of Acquisitions |
| Measure IMAQ Triggers with DAQ examples |
Requirements
Filename: 202660.llb
Software Requirements
Application Software: LabVIEW Base Development System 6.1
Toolkits and Add-Ons: LabVIEW Vision Development Module 6.1
Language(s): Visual Basic, LabVIEW
Hardware Requirements
Hardware Group: Vision (IMAQ), Multifunction DAQ (MIO)
Driver: Traditional NI-DAQ (Legacy) 6.5.0, NI-IMAQ 2.6
Software Requirements
Application Software: Measurement Studio Visual C++ Support 6.0
Language(s): LabVIEW, Visual Basic
Hardware Requirements
Hardware Group: Vision (IMAQ), Multifunction DAQ (MIO)
Driver: Traditional NI-DAQ (Legacy) 6.9.2, NI-IMAQ 2.5.2
Reader Comments | Submit a comment »
Legal
This example program (this "program") was developed by a National Instruments ("NI") Applications Engineer. Although technical support of this program may be made available by National Instruments, this program may not be completely tested and verified, and NI does not guarantee its quality in any way or that NI will continue to support this program with each new revision of related products and drivers. THIS EXAMPLE PROGRAM IS PROVIDED "AS IS" WITHOUT WARRANTY OF ANY KIND AND SUBJECT TO CERTAIN RESTRICTIONS AS MORE SPECIFICALLY SET FORTH IN NI.COM'S TERMS OF USE (http://ni.com/legal/termsofuse/unitedstates/us/).