Academic Company Events NI Developer Zone Support Solutions Products & Services Contact NI MyNI

Document Type: Example Program
NI Supported: Yes
Publish Date: Nov 8, 2007

Finite Waveform Generation with a Look-Up Table on CompactRIO

0 ratings | 0.00 out of 5
Print

Downloads

Filename: finitenonlinearoutput8.zip
Requirements: View

Filename: finitenonlinearoutput.zip
Requirements: View

This program outputs a single cycle of a waveform on a CompactRIO analog output module that is stored in a look-up table on the FPGA. This example program includes a VI that will generate the values in the look-up table according to a mathematical equation. The look-up table initialization is done on the host. The program will output each point in the look-up table and then complete.  The program is available in two versions, LabVIEW 7.1 (finitenonlinearoutput.zip), and 8.0 (finitenonlinearoutput8.zip). 

NOTE: This program was developed with a CompactRIO 9102 controller and a cRIO-9263 module in slot 2 of the chassis. If you are using a different setup, do not forget to change the analog output to match your hardware setup. You may also have to change the host VI to point to your controller in the Open FPGA VI Reference function.

Related Links:
Developer Zone Tutorial: Waveform Generation with CompactRIO

Requirements


Filename: finitenonlinearoutput8.zip

Software Requirements


Application Software: LabVIEW Professional Development System 8.0
Toolkits and Add-Ons: LabVIEW Real-Time Module 8.0, LabVIEW FPGA Module 8.0
Language(s): LabVIEW

Hardware Requirements


Hardware Group: CompactRIO
Hardware Model: cRIO-9002, NI 9263
Driver: NI-RIO 2.0

 
Filename: finitenonlinearoutput.zip

Software Requirements


Application Software: LabVIEW Full Development System 7.1
Toolkits and Add-Ons: LabVIEW FPGA Module 1.1
Language(s): LabVIEW

Hardware Requirements


Hardware Group: CompactRIO
Hardware Model: NI 9263
Driver: NI-RIO 1.1

 
0 ratings | 0.00 out of 5
Print

Reader Comments | Submit a comment »

 

Legal
This example program (this "program") was developed by a National Instruments ("NI") Applications Engineer. Although technical support of this program may be made available by National Instruments, this program may not be completely tested and verified, and NI does not guarantee its quality in any way or that NI will continue to support this program with each new revision of related products and drivers. THIS EXAMPLE PROGRAM IS PROVIDED "AS IS" WITHOUT WARRANTY OF ANY KIND AND SUBJECT TO CERTAIN RESTRICTIONS AS MORE SPECIFICALLY SET FORTH IN NI.COM'S TERMS OF USE (http://ni.com/legal/termsofuse/unitedstates/us/).