Academic Company Events NI Developer Zone Support Solutions Products & Services Contact NI MyNI

Document Type: Example Program
NI Supported: Yes
Publish Date: Sep 6, 2006


Feedback


Yes No

Related Categories

Related Links - Developer Zone

Related Links - Products and Services

Find Available IP Addresses on the Subnet

1 ratings | 5.00 out of 5
Print

Downloads

Filename: findavailableip.llb
Requirements: View

When adding a device to a network, you must often choose an IP address for the device. The method you use to obtain an IP address may depend on whether you have a network with an administrator or not. If you have a network with an administrator, it is best to consult with the administrator to choose an appropriate IP address for the device. If your network does not have an administrator, or it is necessary to find an available address on your own, you can use this VI to determine which IP addresses on a subnet are available for use. This example automates the task of sequentially pinging multiple IP addresses on a given subnet to determine which IP addresses are available. The pinged IP addresses are added to a table along with their availibility status.

Requirements


Filename: findavailableip.llb

Software Requirements


Application Software: LabVIEW Base Development System 6.1
Language(s): LabVIEW

 
1 ratings | 5.00 out of 5
Print

Reader Comments | Submit a comment »

 

Legal
This example program (this "program") was developed by a National Instruments ("NI") Applications Engineer. Although technical support of this program may be made available by National Instruments, this program may not be completely tested and verified, and NI does not guarantee its quality in any way or that NI will continue to support this program with each new revision of related products and drivers. THIS EXAMPLE PROGRAM IS PROVIDED "AS IS" WITHOUT WARRANTY OF ANY KIND AND SUBJECT TO CERTAIN RESTRICTIONS AS MORE SPECIFICALLY SET FORTH IN NI.COM'S TERMS OF USE (http://ni.com/legal/termsofuse/unitedstates/us/).