Acquire Multiple Analog Waveforms with Visual C/C++
PrintDownloads
Filename: scansinglebufasync.zip
Requirements: View
Note: The MAK file provided is for Visual C++ version 2.0 (32bit) or later.
Pin Connection Information¿Connect your analog signals to AI channels 1 and 2. The example uses the default analog input mode for the data acquisition (DAQ) device.
For more information on I/O connection, refer to your hardware user manual. For more information on how to run this example, refer to the NI-DAQ Examples Help(NIDAQEx.HLP). Refer to the README.txt contained within the ZIP file for instructions and troubleshooting for compiling this example.
Requirements
Filename: scansinglebufasync.zip
Software Requirements
Language(s): Visual C++
Hardware Requirements
Hardware Group: Multifunction DAQ (MIO)
Driver: Traditional NI-DAQ (Legacy) 6.9.0
Reader Comments | Submit a comment »
Legal
This example program (this "program") was developed by a National Instruments ("NI") Applications Engineer. Although technical support of this program may be made available by National Instruments, this program may not be completely tested and verified, and NI does not guarantee its quality in any way or that NI will continue to support this program with each new revision of related products and drivers. THIS EXAMPLE PROGRAM IS PROVIDED "AS IS" WITHOUT WARRANTY OF ANY KIND AND SUBJECT TO CERTAIN RESTRICTIONS AS MORE SPECIFICALLY SET FORTH IN NI.COM'S TERMS OF USE (http://ni.com/legal/termsofuse/unitedstates/us/).