Academic Company Events NI Developer Zone Support Solutions Products & Services Contact NI MyNI

Document Type: Example Program
NI Supported: Yes
Publish Date: Sep 6, 2006


Feedback


Yes No

Related Categories

Related Links - Developer Zone

Related Links - Products and Services

Synchronization of a TIO Counter and a High-Speed Digitizer

1 ratings | 3.00 out of 5
Print

Downloads

Filename: scope_-_counter_synch.vi
Requirements: View

The example synchronizes an NI 5112 digitizer with a TIO counter. A 10 MHz signal is generated on the counter and routed through RTSI to the NI 5112, where the signal is used as a reference clock. The NI 5112 performs a digitally triggered multi-record acquisition. A separate counter on the TIO device is used to trigger each record.

A RTSI cable is required for this example to work.

Requirements


Filename: scope_-_counter_synch.vi

Software Requirements


Application Software: LabVIEW Full Development System 6.1
Language(s): LabVIEW

Hardware Requirements


Hardware Group: High-Speed Digitizers (Scopes), Counter/Timers (TIO)
Hardware Model: PCI-5112, PXI-5112, PXI-6624, DAQPad-5112 for IEEE 1394, DAQCard-6601, PCI-6601, PXI-6610, PCI-6608, PCI-6610, PCI-6624, PXI-6601, PXI-6602, PXI-6608, PCI-6602
Driver: NI-Scope 2.1.4, Traditional NI-DAQ (Legacy) 6.9.3

 
1 ratings | 3.00 out of 5
Print

Reader Comments | Submit a comment »

 

Legal
This example program (this "program") was developed by a National Instruments ("NI") Applications Engineer. Although technical support of this program may be made available by National Instruments, this program may not be completely tested and verified, and NI does not guarantee its quality in any way or that NI will continue to support this program with each new revision of related products and drivers. THIS EXAMPLE PROGRAM IS PROVIDED "AS IS" WITHOUT WARRANTY OF ANY KIND AND SUBJECT TO CERTAIN RESTRICTIONS AS MORE SPECIFICALLY SET FORTH IN NI.COM'S TERMS OF USE (http://ni.com/legal/termsofuse/unitedstates/us/).