Academic Company Events NI Developer Zone Support Solutions Products & Services Contact NI MyNI

Document Type: Example Program
NI Supported: Yes
Publish Date: Sep 6, 2006

Subscribe

Add to Del.icio.us

DIGG this!


Feedback


Yes No

Related Categories

Products

Development Topic

Related Links - Developer Zone

Related Links - Products and Services

Helical Arc

0 ratings | 0.00 out of 5
Print

Downloads

Filename: helicalarc.zip
Requirements: View

This example demonstrates a helical arc move using three axes.
The move is configured in the NIMotion control property pages. A Visual Basic Timer control is used to periodically read the current position from all axes, which is displayed in a Measurement Studio 3D Graph control.

Requirements


Filename: helicalarc.zip

Software Requirements


Application Software: Measurement Studio Visual C++ Support 6.0
Toolkits and Add-Ons: Measurement Studio Motion Control Module
Language(s): Visual Basic

Hardware Requirements


Hardware Group: Motion Control
Driver: NI-Motion 8.0

 
0 ratings | 0.00 out of 5
Print

Reader Comments | Submit a comment »

 

Legal
This example program (this "program") was developed by a National Instruments ("NI") Applications Engineer. Although technical support of this program may be made available by National Instruments, this program may not be completely tested and verified, and NI does not guarantee its quality in any way or that NI will continue to support this program with each new revision of related products and drivers. THIS EXAMPLE PROGRAM IS PROVIDED "AS IS" WITHOUT WARRANTY OF ANY KIND AND SUBJECT TO CERTAIN RESTRICTIONS AS MORE SPECIFICALLY SET FORTH IN NI.COM'S TERMS OF USE (http://ni.com/legal/termsofuse/unitedstates/us/).