Academic Company Events NI Developer Zone Support Solutions Products & Services Contact NI MyNI

Document Type: Example Program
NI Supported: Yes
Publish Date: Sep 6, 2006

TClk Multi-Digitizer Synchronization

0 ratings | 0.00 out of 5
Print

Downloads

Filename: tclk_synchronization.zip
Requirements: View

TClk synchronization integrates the 10 MHz back plane clock, the PXI trigger lines, and the on-board trigger clock to synchronize measurements. In addition, it performs configuration automatically with the three TClk VI¿s. The following program uses a PXI arbitrary waveform generator to generate a sine wave. The signal is then sampled by two PXI digitizers. Finally, the program computes the phase and timing difference between the signals from the digitizers.

Requirements


Filename: tclk_synchronization.zip

Software Requirements


Application Software: LabVIEW Full Development System 7.1
Language(s): LabVIEW

Hardware Requirements


Hardware Group: High-Speed Digitizers (Scopes)
Hardware Model: PXI-5122
Driver: NI-DAQmx 7.2, NI-Scope 2.7, NI-FGEN 2.2, IVI Compliance Package 2.2

 
0 ratings | 0.00 out of 5
Print

Reader Comments | Submit a comment »

 

Legal
This example program (this "program") was developed by a National Instruments ("NI") Applications Engineer. Although technical support of this program may be made available by National Instruments, this program may not be completely tested and verified, and NI does not guarantee its quality in any way or that NI will continue to support this program with each new revision of related products and drivers. THIS EXAMPLE PROGRAM IS PROVIDED "AS IS" WITHOUT WARRANTY OF ANY KIND AND SUBJECT TO CERTAIN RESTRICTIONS AS MORE SPECIFICALLY SET FORTH IN NI.COM'S TERMS OF USE (http://ni.com/legal/termsofuse/unitedstates/us/).