Academic Company Events NI Developer Zone Support Solutions Products & Services Contact NI MyNI

Document Type: Example Program
NI Supported: Yes
Publish Date: Sep 6, 2006

Synchronizing a DSA Device and MIO Device to Sample at the Same Rate

0 ratings | 0.00 out of 5
Print

Downloads

Filename: dsa_sync_with_mio_samerate.vi
Requirements: View

This example demonstrates how you can synchronize a DSA device with a MIO device while sampling at the same rate in DAQmx. The DSA device must always be the master and it exports its sample clock to be used as an external clock on the MIO device.

Requirements


Filename: dsa_sync_with_mio_samerate.vi

Software Requirements


Application Software: LabVIEW Base Development System
Language(s): LabVIEW

Hardware Requirements


Hardware Group: Multifunction DAQ (MIO), Dynamic Signal Analyzers (DSA)
Hardware Model: PCI-4472, PCI-4474, PXI-4472B, PXI-4462, PXI-4472, PXI-4461
Driver: NI-DAQmx 7.3

 
0 ratings | 0.00 out of 5
Print

Reader Comments | Submit a comment »

 

Legal
This example program (this "program") was developed by a National Instruments ("NI") Applications Engineer. Although technical support of this program may be made available by National Instruments, this program may not be completely tested and verified, and NI does not guarantee its quality in any way or that NI will continue to support this program with each new revision of related products and drivers. THIS EXAMPLE PROGRAM IS PROVIDED "AS IS" WITHOUT WARRANTY OF ANY KIND AND SUBJECT TO CERTAIN RESTRICTIONS AS MORE SPECIFICALLY SET FORTH IN NI.COM'S TERMS OF USE (http://ni.com/legal/termsofuse/unitedstates/us/).