VB.NET NI-FGEN - Triggers
PrintThis .NET program shows how the different trigger sources and modes work. The user can set the sample rate, trigger mode and trigger source and then start generation. This program also displays the construction of an arbitrary waveform that takes the shape of a partial sinewave, a partial ramp and a partial DC wave.
Using VB.NET (.NET Language) requires us to wrap the NI-FGEN driver. To use this example program, you will need to download the NI-FGEN wrapper from the below link and include the niFGEN.vb file within your project. The NI-FGEN_NEW wrapper is for use with NI-FGEN 2.6.1 and above. For older versions of NI-FGEN, use the wrapper included in the NI-FGEN.zip file.
| Related Links: |
| Visual C# and Visual Basic .NET Wrappers for National Instruments Modular Instruments Drivers Using NI-FGEN with C# and Visual Basic .NET |
Requirements
Filename: trigs.zip
Software Requirements
Language(s): Visual Basic .NET
Hardware Requirements
Hardware Group: Signal Source (AWG/FG/AO)
Driver: NI-FGEN 2.3
Reader Comments | Submit a comment »
Legal
This example program (this "program") was developed by a National Instruments ("NI") Applications Engineer. Although technical support of this program may be made available by National Instruments, this program may not be completely tested and verified, and NI does not guarantee its quality in any way or that NI will continue to support this program with each new revision of related products and drivers. THIS EXAMPLE PROGRAM IS PROVIDED "AS IS" WITHOUT WARRANTY OF ANY KIND AND SUBJECT TO CERTAIN RESTRICTIONS AS MORE SPECIFICALLY SET FORTH IN NI.COM'S TERMS OF USE (http://ni.com/legal/termsofuse/unitedstates/us/).