Academic Company Events NI Developer Zone Support Solutions Products & Services Contact NI MyNI

Document Type: Example Program
NI Supported: Yes
Publish Date: Sep 6, 2006


Feedback


Yes No

Related Categories

Related Links - Developer Zone

Related Links - Products and Services

Switching Between Multiple Analog Input Tasks in NI-DAQmx

0 ratings | 0.00 out of 5
Print

Downloads

Filename: 202897.vi
Requirements: View

This VI allows you to set up to different analog input tasks and quickly switch between running each one. Both tasks are configured at the same time, but only run is running at a time. When the front panel "Task Select" switch changes tasks, the task that is currently running is stopped and the other task is started. In this manner you can "hot swap" between two tasks in the same VI.

Requirements


Filename: 202897.vi

Software Requirements


Application Software: LabVIEW Full Development System 7.0
Language(s): LabVIEW

Hardware Requirements


Hardware Group: Multifunction DAQ (MIO)
Hardware Model: PCI-6023E, PCI-6284, PCI-6025E, PCI-6031E, PCI-6032E, PCI-6033E, PCI-6034E, PCI-6035E, PCI-6036E, PCI-6040E (PCI-MIO-16E-4), PCI-6052E, PCI-6053E, PCI-6071E, PCI-6220, PCI-6221, PCI-6222, PCI-6224, PCI-6229, PCI-6250, PCI-6251, PCI-6254, PCI-6259, PCI-6280, PCI-6281, PCI-6024E
Driver: NI-DAQmx 7.3

 
0 ratings | 0.00 out of 5
Print

Reader Comments | Submit a comment »

 

Legal
This example program (this "program") was developed by a National Instruments ("NI") Applications Engineer. Although technical support of this program may be made available by National Instruments, this program may not be completely tested and verified, and NI does not guarantee its quality in any way or that NI will continue to support this program with each new revision of related products and drivers. THIS EXAMPLE PROGRAM IS PROVIDED "AS IS" WITHOUT WARRANTY OF ANY KIND AND SUBJECT TO CERTAIN RESTRICTIONS AS MORE SPECIFICALLY SET FORTH IN NI.COM'S TERMS OF USE (http://ni.com/legal/termsofuse/unitedstates/us/).