USB RAW Bulk Communication with Visual C#.NET
PrintDownloads
Filename: usbrawbulkcs.zip
Requirements: View
To run this application, install a USB RAW device and configure Measurement & Automation Explorer (MAX) to recognize the USB device (see Tutorial: Using NI-VISA 3.0 to Control Your USB Device at www.ni.com). After the USB RAW device is successfully installed and configured, and you have opened a session to the device, you can read to and write from the USB RAW device.
To read to or write from another USB device, close the session to the current device, select the other device from the VISA resource name control, and open a session to it.
When finished, simply close the window to exit the application.
Requirements
Filename: usbrawbulkcs.zip
Software Requirements
Language(s): C#
Reader Comments | Submit a comment »
Legal
This example program (this "program") was developed by a National Instruments ("NI") Applications Engineer. Although technical support of this program may be made available by National Instruments, this program may not be completely tested and verified, and NI does not guarantee its quality in any way or that NI will continue to support this program with each new revision of related products and drivers. THIS EXAMPLE PROGRAM IS PROVIDED "AS IS" WITHOUT WARRANTY OF ANY KIND AND SUBJECT TO CERTAIN RESTRICTIONS AS MORE SPECIFICALLY SET FORTH IN NI.COM'S TERMS OF USE (http://ni.com/legal/termsofuse/unitedstates/us/).