Acquiring Digitizer Data to DIAdem From LabVIEW
PrintDownloads
Filename: scopediadem.vi
Requirements: View
This example shows how to acquire data from a National Instruments High Speed Digitizer and save it to a DIAdem data file. The VI automatically launches the DIAdem Report Wizard to display the acquired data. LabVIEW 6.0.2 or later, DIAdem 8.1 (may use evaluation version), and a National Instruments Digitizer are required.
Instructions: Choose a Valid Resource Name for your NI Scope Hardware. Connect your signal to Channel 0 and enter the Channel Information. Run the VI. It will acquire 1000 points and prompt you for a location to save the DIAdem Data file. The DIAdem Report Wizard will launch and display the acquired data.
| Related Links: |
| LabVIEW Toolsets: LabVIEW DIAdem Connectivity Toolkit |
| Download Free DIAdem Evaluation Version |
Requirements
Filename: scopediadem.vi
Software Requirements
Application Software: LabVIEW Full Development System 6.0.2, DIAdem Development System 8.10
Toolkits and Add-Ons: LabVIEW DIAdem Connectivity VIs Toolkit 2.0
Language(s): LabVIEW
Hardware Requirements
Hardware Group: High-Speed Digitizers (Scopes)
Driver: NI-Scope 2.1.4
Reader Comments | Submit a comment »
Legal
This example program (this "program") was developed by a National Instruments ("NI") Applications Engineer. Although technical support of this program may be made available by National Instruments, this program may not be completely tested and verified, and NI does not guarantee its quality in any way or that NI will continue to support this program with each new revision of related products and drivers. THIS EXAMPLE PROGRAM IS PROVIDED "AS IS" WITHOUT WARRANTY OF ANY KIND AND SUBJECT TO CERTAIN RESTRICTIONS AS MORE SPECIFICALLY SET FORTH IN NI.COM'S TERMS OF USE (http://ni.com/legal/termsofuse/unitedstates/us/).